Landtek Instruments Multi Vibration Meter with Piezoelectric Trans...

Small size Vibration Tester, very easy to carry and light weight convenient to use and operate. It is used for measuring periodic motion, check the imbalance and deflecting of moving machinery.

Features:
In accordance with ISO 2954, used for periodic measurements, to detect out of balance, misallignment and other mechanical faults in rotating machines.
Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commisioning, and predictive maintenace purposes.
Individual high quality accelerometer for accurate and repeatable measurements
Bearing condition monitoring finction
Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface (not included in the set)

Specifications:
Display: 4 digit LCD backlit
Accuracy: 5% of reading + 2 digits
Frequency: 5Hz~1kHz
Frequency Range:
*Displacement: 10Hz~1kHz
*Acceleration: 10Hz~10kHz
*Velocity: 10Hz~1kHz
Metric Imperial Conversion
Analogue Output: AC output 0~2.0V peak full scale (load resistance: above 10k)
With Max. value hold and low battery indication
PC interface: RS232C (cable and software not included in the set)
Power off: Manual off at any time or auto power off is enabled by user
Power Supply: 2 x 1.5V AA batteries
Size: 130 x 76 x 32mm
Weight: 340g (excluding battery)

Set Includes:
1 x Digital Vibration Meter
1 x Magnetic Suction Seat
1 x Piezoelectric Transducer
1 x Probe (Cone)
1 x Probe (Spherical)
1 x English Operation Manual
Carrying Case
Standard Factory Packaging

• Sensor: Piezoelectric Transducer
• Displacement Range : 0.001~4.000mm Equivalent Peak~Peak: 0.04~160.0 mil
• Velocity Range : 0.01~400.0mm/s True RMS: 0.004~16.00 inch/s
• Acceleration: 0.1~400.0m/s2 Equivalent Peak: 0.3~1312ft/s2; 0.0~40g
• Operationg conditions: Temperature: 0~50°C / Humidity: <90 %RH