Landtek Instruments Digital Vibration Meter Gauge Tester Analyzer

This Vibration meter is one of the most useful tools in everyday machinery vibration monitoring. Measures vibration in terms of Displacement, Velocity, Acceleration and High Frequency Acceleration in Metric & Imperial units. It has individual high quality accelerometer for accurate and repeatable measurements with magnetic base.

Features:
Bearing condition monitoring function
Conforms to international standards and passed the standards of ISO-2954

Specifications:
Measuring Range:
*Speed: 0.1-400.00mm/s
*Velocity:*0.000-16.00inch/s
*Acceleration: 0.01-400m/s2
*Acceleration: 0.1-200m/s2
**0.3-1312 ft/s2
*Displacement/offset: 0.001-4.00mm
**0.04-160.0mil
*Turns: 60-99990 (rpm)
*Revolution: 60-99990 R.P.M.
Frequency Range for Measuring:
*Velocity: 10Hz to 1kHz
*Acceleration: 10Hz to 1kHz in 1 mode
**10Hz to kHz in 10 mode for bearing condition check
*Displacement: 10Hz to 1kHz
Resolution: 0.01(mm/s2)
*0.1(mm/s2)
*0.001(mm)
*1(U/min)
Power Supply: 4 x 1.5 ZZZ size (UM-4) batteries
2 Power Off modes:
*Manual off at any time
*Auto power off after 5 minutes from last key operation
Operating Condition:
*Temperature is 0~40°C
*Humidity below 90% RH
Dimension: 124mm x 62mm x 30mm

Set Includes:
1 x DIGITAL VIBRATION METER
1 x Powerful rare earth magnet
1 x Accelerometer / Piezoelectricity Transducer
1 x Cone Stinger Probe
1 x Ball Stinger Probe
1 x Protective Carrying Case with contoured rubber foam inside
1 x English Operation Manual

• Parameters Measured: Velocity, Acceleration, Displacement RPM and Frequency
• Transducer: Piezoelectric accelerometer
• Measuring Range: Speed: 0.1-400.00mm/s Velocity:*0.000-16.00inch/s Acceleration: 0.01-400m/s2
• Accuracy: <5% +2 digits; Output: AC output 2.0V peak full scale (load resistance: above 10k)
• Metric and Imperial Conversion; Max Hold; Low battery indicator