Analog pH Sensor Meter Pro Kit Arduino of Raspberry Water Quality ...

Analog pH Sensor Meter Pro Kit Arduino of Raspberry Water Quality Tester Kit Ph Sensor Module PH Meter Measuring Element Water Quality Detection in Aquariums Arduino Controller

Need to measure water quality and other parameters but haven't got any low cost pH meter? Find it difficult to use with Arduino? Here comes an analog pH meter, specially designed for Arduino controllers and has built-in simple, convenient and practical connection and features. It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BNC connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. If pre-programmed, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage.

Attention:In order to ensure the accuracy of the pH probe, you need to use the standard solution to calibrate it regularly.Generally, the period is about half a year. If you meaure the dirty aqueous solution, you need to increase the frequency of calibration.

Applications

Water quality testing

Aquaculture

Specification

Module Power : 5.00V

Module Size : 43mm×32mm

Measuring Range:0-14PH

Measuring Temperature :0-60 ℃

Accuracy : ± 0.1pH (25 ℃)

Response Time : ≤ 1min

pH Sensor with BNC Connector

PH2.0 Interface ( 3 foot patch )

Gain Adjustment Potentiometer

Power Indicator LED

Cable Length from sensor to BNC connector:660mm

• ✪The first Arduino compatible pH sensor
• ✪Simple connection, connect the onboard PH2.0 interface to the analog port of the Arduino controller
• ✪With program control, you can easily measure the pH of the solution
• ✪Applications: Water quality testing, aquaculture
• ✪Supported by our 90-day unconditional money back guarantee policy, this purchase is now 100% risk free!