TECHTONGDA Screen Printing Hinge Clamp for Silk Screen Printing Ma...

TECHTONGDA Screen Printing Hinge Clamp for Silk Screen Printing Machine Hobby Screen Printer 12x18 Inches

• Suitable for all kinds of plane product printing, like: electronic circuit board, paper box, glass, board, metal plate, and all kinds of board, etc. Do not recommend to use this machine for cloth, ribbons, sashes, paper, thin plastic sheets and other light materials. (These materials are too thin, after printing, the screen frame may stuck with the plate then mess up the printing result ).Paper, thin plastic sheets and other lighter materials are recommended to use vacuum screen pallet.
• This printer should be fixed on the table or plank, equiped with 3 handles / 2 support holders/ 2 gravity balance plates. Balance plate can be installed individually or together according to weight request, it can be moved forward and back within 4 inches (10cm ).
• With the bolt in the balance rack, could adjust the lifting angle and height of the screen frame.It is suitable for printing of various substrates within the thickness of 1.57 inches.
• Also equip with a rubber sheet, size 19.6" x 11.8" (50x30cm). It is used to place on the table under the printing object.
• The machine is suitable for screen frame of various materials with inner dimension 13.7 inches wide, 19.6 inches length and 2.3 inches thick.The recommended printing area is 11.8" x 17.7" (30x45 cm).