Glarks 2Pcs Wire Crimper Terminal Crimping Tool Cable Lug Crimper ...

Glarks 2Pcs Wire Crimper Terminal Crimping Tool Cable Lug Crimper Cu/Al Terminal Ratchet Electrician Plier with Cable Cutter for 10, 8, 6, 4, 2, 1/0 AWG Wire Cable Cutting and Crimping

Glarks 2Pcs Wire Crimper Terminal Crimping Tool Cable Lug Crimper Cu/Al Terminal Ratchet Electrician Plier with Cable Cutter

Specification:
☛ Material: #45 steel + PPE(Handle)
☛ Main Color: Blue
☛ Applicable Range: 6-50mm² (AWG10-1/10)
☛ Setting levels of crimper: 10, 8, 6, 4, 2, 1/0 AWG (6/10/16/25/35/50 mm²)
☛ Length of crimper: approx 39.5 cm
☛ Width of crimper: approx 14.2 cm
☛ Thickness of crimper: approx 4.2 cm
☛ Weight: about 1.3 kg
☛ Material of crimper: metal

Package Included:
Crimping Tool X 1
Cable Cutter X 1

Why Choose Us:
☑ Cable crimper and cable wire cutter in a kit, save money and meet your work needs.
☑ High quality #45 steel cable crimper tool, ergonomic design and anti-slip rubber coated handle help you use less effort when crimping.
☑ Works for bare cable of 6-50 mm², widely application in automatic electronics work.

How to Use:
① First, cut the cable you need to crimp with the cable cutter, then strip it with a stripper (not included, recommend ASIN: B07KDRP36R, B07KDQT34L).
② Then, press the spring die and rotate the gearwheel to the size which suitable for the cable, release the spring to lock it.
③ Third, choose the suitbale wire lug, put the stripped wire to the wire lug, then take a strong pull of the crimper.
④ Attention: If it leaves a ridge just rotate the connector and re crimp it which will give it even a tighter bond. All finshed. It will give you a good crimp on cable lugs.

Note:
♥ Please check the specific size of the product according to the second picture.
♥ If you have any questions, please feel free to contact me, I will respond to you within 12 hours.

• ★ What You Get : In this crimping tool set, we offer a professional cable crimper and a cable wire cutter, can work for most heavy stripping and crimping work, they were well packed in a paper box.
• ★ Durable Quality : This cable crimper is made of high quality #45 steel, sturdy and durable to use, specially thicken and reinforce the metal plate on crimp head to be stronger.
• ★ ROTATE CRIMP DIES : The professional cable terminal crimping tool has 6 dies for 6mm²/10mm²16mm²/25mm²/35mm²/50mm² (Similar to AWG 10/8/6/4/2/0) wire size crimping, using rotating heads with a spring loaded locking pin to keep the heads in place.
• ★ Ergonomic Design : The handle of the wire crimper is long for 10 inch and wrapped with soft rubber, ergonomic lever structure design can increase friction and help you use less effort when crimping.
• ★ About Wire Cutter : The wire cutter was adopt overall heat treatment, sharpened precisely, the cutting edge is sharp enough to cut hard copper or aluminum cable, suitable for cutting 0- 70 mm² ( smaller than AWG 2/0) wire.