CYEVA 100ft Rain Barrel Drip Irrigation Kit with Y Shape 2-Way Spl...

CYEVA 100ft Rain Barrel Drip Irrigation Kit with Y Shape 2-Way Splitter, 1/4" Blank Distribution Tubing, DIY Water-Saving System for Vegetable Garden Patio Pot Plants Raised Bed

A Must-Have Drip Sprinkler System for Garden, Enjoy Your Summer Without Hand Watering!

Traditional watering methods deliver water faster than most soils can absorb.
If water exceeds the soil's percolation rate, it runs off the surface, taking valuable topsoil and nutrients with it. 

Use with A Rain Barrel -- Save Even More Water!

For many gardeners, water conservation is the main reason for installing a drip system.
Drip irrigation gives you the ability to put water exactly where it's needed and keep paths and areas between plants dry. This reduces both waste and weeding.

Rainwater harvesters know how fast and easy it is to fill a whole series of rain barrels from the roof. But once those barrels are full, how do we distribute the water to our plants?
When we let this rain barrel irrigation kit to the work, that part can be easy, too.

Drip System Kit package include 

- 50ft + 50ft 1/4" Hose

- 30 x Adjustable Drippers 

- 20 x Atomizing Nozzle

- 1 x Threaded Faucet Connector

- 1 x Y shape Splitter

- 2 x Tubing Quick Connector

- 1x Teflon Tape 

- 1 x Hole Puncher

- 10 x Barbed Couplings 

- 30 x Barbed Tees 

- 20 x Tee Pipe Connectors

- 30 x Support Stakes

- 2 x End Closures

• Y Shape 2-Way Splitter: Equipped with a Y-type water separator which can be individually switched, allowing two watering routes be controlled independently without affecting each other
• Save 70% Water and Time: No longer have to do the time-consuming watering and stand the heat outside, enjoy a summer without hand watering! Reduce water usage up to 70% compared to manually watering
• 2 Different Drip Emitters: Drippers for irrigating at root zone and nozzles for misting above the plants. Each emitter can be adjusted individually by rotating, meeting the water demand of different plants at one time
• Easy Setup: Provides everything needed to install a water-saving irrigation kit, can water 30 pots in one time. Easy installation with a manual in pictures
• TIPS: Put the head of tube into hot water (160~180℉) for 10-15 sec before assembling, helps soften the tube, allow connecting more solidly and avoid leaking or blow off. In order to balance the water pressure, the closer to faucet, emitters should be adjusted to the smaller water flow